BIG Display
Meters and Controllers
57 and 101 mm (2.25 and 4")
Displays Available!
U BIG Bright LED 4-Digits U Program to Change Colors:
RED, AMBER, GREEN
U Temperature and Process Input U Strain and Process Input U Optional Relays for Alarm
and Full PID Control
U Communications Via Ethernet,
RS232, RS485, and MODBUS
U Embedded Web Server
The BIG Displays can handle a wide variety of signal inputs direct from transducer or process transmitters and offer multiple control output options and serial or Ethernet connectivity for logging the data.
The “Universal Temperature+Process BIG Display” (iLD-UTP) is designed for Thermocouples, RTD’s, and Process (DC) Voltage or Current. It handles TEN (10) thermocouple types: K, J, T, E, R, S, B, C, N, & J DIN. It works with a wide selection of RTD’s, both Pt.
0.00385 and 0.00392 curves for 100 Ω, 500 Ω, and 1000 Ω and it measures with 2, 3, or 4 wire connections for the highest accuracy. This model also measures process voltage: 0 to 100 mV, 0 to 1V, 0 to 10V ranges and process current, 0 to 20 mA (4 to 20 mA) with built-in excitation of 24 Vdc standard.
The “Universal Strain+Process BIG Display” (iLD-SP) handles a wide variety of DC voltage and current outputs from all common load cells, pressure transducers, and most any strain gage type of transducer. The meter measures input ranges of 0 to 100 mV, -100 mV to 1V, 0 to 10V, 0 to 20 mA (4 to 20 mA) with built-in excitation of 5 Vdc and 10 Vdc standard. This model also features 10 point linearization enabling accurate measurements from a wide assortment of unique and nonlinear transducers.
®
Meters shown smaller than actual size.
The BIG Displays are easy to configure and scale to virtually any engineering units with the push buttons on the front panel, or with a personal computer using the free configuration software and the optional Ethernet connectivity or Serial Communications. The Ethernet option allows the device to be connected on a standard Ethernet network and communicates using standard TCP/IP protocol. The Ethernet option (-C4EI) also includes RS485 (and RS422) Serial Communications. The serial communications option (-C24) includes both RS232 and RS485 (and RS422) on one instrument. It communicates with a straightforward ASCII communications protocol, as well as MODBUS protocol.
Control Functions
The Universal BIG Displays features a choice of two optional outputs: Form C SPDT (single pole double throw) mechanical relays (-3), Solid State Relays (-2), DC pulse (-4), and/or programmable analog output (-5) selectable as either a controlling function or as retransmission of the process value.
The Universal BIG Displays can control simple manual operation to ON-OFF and full Autotune PID control. (Selectable preset tune, adaptive tune, PID, PI, PD control modes.) The dual control outputs can be configured for a variety of independent control and alarm applications. The ramp-to-setpoint feature allows the user to define the rate of rise to setpoint, minimizing thermal shock to the load during start-up. Maximum ramp time: 99.59 (HH.MM), Soak: 00.00 to 99.59 (HH.MM), Damping: 1 to 8 in unit steps. Input types: 0 to 20 mA, 0 to 100 mV, 0 to 1 V and 0 to 10 Vdc.
For applications that do not require PID control, Universal BIG Displays controllers are available in a special model that offer simplified programming. The Universal BIG Displays “Simplified Menu” model (specify -SM option) offers simplified programming. The menu flowchart is similar to programmable digital panel meters that are used for on/off control or alarms. (Please see the Universal BIG Displays operator’s manuals for programming details.)
M-87
Programmable Color Display
The BIG Display can be programmed to change colors between RED,
AMBER, and GREEN at any set point
or alarm point. The BIG Display has a wide range of signal inputs as well as control, alarm, and communication outputs including: RS232, RS485, MODBUS
®
, and Ethernet. The device with an embedded Web Server can connect directly to Ethernet/Internet. You can “see” your meter and control your process through a web browser over the Internet from halfway around the world. With the BIG Display, you can also see your meter from a hundred feet.
The BIG Display can be mounted flush in a panel or surface mounted with the included brackets. The entire BIG Display enclosure provides NEMA 4 (IP65) protection. Whether panel-mounted or surface-mounted, the BIG Display does not need to go inside a bulky and expensive NEMA enclosure.
Configuration of the iLD-UTP or iLD-SP can be performed by using either -C24 or -C4EI options and the configuration software that is available on our website.
Universal Temperature and Process Input (Model UTP)
Accuracy: ±0.5°C temp; 0.03%
reading process
Resolution: 1°/0.1°; 10 µV process Temperature Stability: RTD: 0.04°C/°C
Thermocouple @ 25°C (77°F):
0.05°C/°C—cold junction compensation
Process: 50 ppm/°C NMRR: 60 dB; CMRR: 120 dB A/D Conversion: Dual slope Reading Rate: 3 samples per second Digital Filter: Programmable Display: 4-digit, 7-segment LED
57.2 mm (2.25") or 101.6 mm (4.00") red, green and amber programmable colors for process variable, set point and temperature units
Input Types: Thermocouple, RTD, analog voltage, analog current
Thermocouple Lead Res: 100 Ω max Thermocouple Type (ITS 90):
J, K, T, E, R, S, B, C, N, L RTD Input (ITS 68): 100/500/1000 Ω
Pt sensor, 2-, 3- or 4-wire; 0.00385 or
0.00392 curve Voltage Input: 0 to 100 mV, 0 to 1 V,
0 to 10 Vdc Input Impedance: 10 MΩ for 100 mV
1 MΩ for 1 or 10 Vdc
Current Input: 0 to 20 mA (5 Ω load) Configuration: Single-ended Polarity: Unipolar Step Response: 0.7 sec for 99.9% Decimal Selection:
Temperature: None, 0.1 Process: None, 0.1, 0.01 or 0.001
Setpoint Adjustment: -1999 to 9999 cts Span Adjustment: 0.001 to 9999 cts Offset Adjustment: -1999 to 9999 Excitation (Optional in Place of
Communication): 24 Vdc @ 25 mA
Universal Strain and Process Input (Model SP)
Accuracy: 0.03% reading Resolution: 10/1µV Temperature Stability: 50 ppm/°C NMRR: 60 dB; CMRR: 120 dB A/D Conversion: Dual slope Reading Rate: 3 samples per second Digital Filter: Programmable Input Types: Analog voltage,
analog current Voltage Input: 0 to 100 mVdc,
-100 mVdc to 1 Vdc, 0 to 10 Vdc Input Impedance: 10 MΩ for 100 mV;
1 MΩ for 1 V or 10 Vdc
Current Input: 0 to 20 mA (5 Ω load) Linearization Points: Up to 10
Linearization Points Configuration: Single-ended Polarity: Unipolar Step Response: 0.7 sec for 99.9% Decimal Selection: None, 0.1, 0.01 or 0.001 Setpoint Adjustment: -1999 to 9999 cts Span Adjustment: 0.001 to 9999 cts Offset Adjustment: -1999 to 9999 Excitation (Optional in Place of
Communication):
5 Vdc @ 40 mA; 10 Vdc @ 60 mA
Communication Options
Ethernet: Standards compliance
IEEE 802.3 10Base-T Supported Protocols: TCP/IP, ARP,
HTTPGET
RS232/RS422/RS485/MODBUS
Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 K baud; complete programmable setup capability; program to transmit current display, alarm status, minimum/maximum, actual measured input value and status
RS485: Addressable from 0 to 199 Connection: Screw terminals Control for UTP, SP Action:
Reverse (heat) or direct (cool)
®
:
Alarm 1 and 2 (Programmable)
Operation: High/low, above/below, band,
latch/unlatch, normally open/normally closed and process/deviation; front panel configurations
Isolation
Power to Input/Output: 2300 Vac per
1 min test (RS-232/485, input or output)
Between Inputs: 500 Vac per 1 min test
General
Power: 100 to 240 Vac ±10%, 50/60 Hz
22.5 W Environmental Conditions: 0 to 40°C
(32 to 104°F), 90% RH non-condensing
Warm-Up to Rated Accuracy:
60 minutes
Protection: NEMA 4 (IP65) front bezel Dimensions
iLD24: 289 L x 137 W x 73 mm D
(11.75 x 5.375 x 2.875 iLD44: 480 L x 211 W x 95 mm D (18.11 x 8.31 x 3.76")
Factory Scaling (-FS) is available if you prefer the unit to be fully configured before shipment.
Please provide your selections for Factory Scaling settings:
iLD-UTP-FS iLD-SP-FS
Input Range = Display Range
Excitation: 24 V
Example:
4-20 mA =
0 to 100.0
")
Input Range = Display Range
Excitation:
5 V or 10 V
Example:
0-30 mVdc =
0 to 100.0;
Exc: 10 Vdc
M
To Order Visit omega.com/ild-utp for Pricing and Details
Basic Model Description Universal Temperature Thermocouple, RTD and Process Input iLD24-UTP iLD44-UTP Strain Gage and Process Input iLD24-SP iLD44-SP Control Outputs*
-33 Communication Options
-C24
-C4EI
-FS
*Contact Sales for Custom Control or Alarm Outputs. Ordering Example: iLD24-UTP-33-C24, large 57.2 mm (2.25") 4-digit controller with temperature/process input, 2 relays and serial communication.
57 mm (2.25") 4-digit display, universal temperature/process, monitor 101 mm (4") 4-digit display, universal temperature/process, monitor
57 mm (2.25") 4-digit display, strain gage/process, monitor 101 mm (4") 4-digit display, strain gage/process, monitor
2 relays—form “C” SPDT 3 A @ 120/240 Vac
Isolated RS-232 and RS-485/422 Ethernet with embedded Web server + RS-485/422 Factory scaling (no charge, see factory scaling table above for required information)
M-88